top of page

PEB Warehouse Shed Manufacturer in India.

Pre-Engineered Steel Buildings Designed for Strength, Space & Efficiency.

Warehouse Shed Fabrication & Erection Services in Bhubaneswar.

Looking for reliable warehouse shed fabrication and erection services in Bhubaneswar, Odisha? CND Engineering provides steel warehouse shed construction, structural steel fabrication, and PEB warehouse solutions for industrial, commercial, and storage applications. We offer customized shed design, quality steel fabrication, and professional on-site erection to meet your project requirements. Our focus is on durable structures, efficient space utilization, cost-effective construction, and timely project completion. From small storage sheds to large industrial warehouses, we deliver tailored steel building solutions. Contact CND Engineering for dependable warehouse shed fabrication and erection services in Bhubaneswar and across Odisha.

Project Details

  • Length:  128 Ft.

  • Width: 66.4 Ft.

  • Height: 20 Ft.

  • Total floor area - 8500 Sqft

  • Total Project cost per sqft as on floor area - RS.701/- 

​​

❁ Column - 36 Pcs

  • Up to 20 ft Hollow tube 150 X 150 X 5 mm, Hollow tube 200 X 200 X 5mm

  • Base plate : 450 X 450 mm - 16 mm

  • Stiffener plate : 300 X 300 mm - 10 mm 

  • Column connection plate : - 10 mm

❁ Truss  - 9 Pcs

  • Truss bottom section Hollow section 200 X 100 X 4 mm 

  • Truss top section Hollow section 100 X 100 X 4 mm

  • Truss cross section Hollow section 72 X 72 X 3.2 mm

❁ Roof Purlin - 14 Lines , Hollow tube 60 X 40 X 2.6mm

  • Side purlin - Hollow tube 122 X 61 X 3.6mm 

  • Column to column runner - Hollow tube 200 X 100 X 4 mm

  • Column to column cross bracing - 2L 65 X 65 X 6 mm

❁ Painting :

  • One coat red-oxide ,Berger make.

  • Two coats enamel smoke grey final paint finish.

❁ Roof and wall cover  :

Roof cover using TATA colorbond 0.50 mm Sky Blue color profile sheet with 55 mm HP brand Screw at each every joint.

Wall cladding using TATA Color Bond0.50 mm off white and brick red color sheet with 25 mm HP brand screw at each every joint.​​

❁ Roof Sheet & Wall Sheet Specification :

She end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The  material will be manufactured from   0.45 mm bmt (BASE METAL THICKNESS ) , 0.50 MM tct( TOTAL COATED THICKNESS ) & 0.53 MM tpt (TOTAL PAINTED THICKNESS) of  COLORBOND XRW steel- High tensile with min 550 MPa yield strength, metallic hot-dipped coated with Al-Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si) as per AS1397 / IS15961 COLORBOND XRW SDP COATING AZ150 (min. 150g/m2 total on both sides) 
The steel sheet shall have brand marking of " COLORBOND XRW STEEL MADE BY TATA BLUESCOPE STEEL along with thickness , coating & other details  on back side at regular interval confirming genuineness of the material.

bottom of page